GlossaryDrainage technical term

Pipe encrustation

Also: Limescale in the pipe, Pipe scaling

Encrustation refers to hard, crust-like deposits on the inner wall of wastewater pipes. Depending on the pipe, they consist of limescale, urine scale, rust, saponified grease or a mixture of these. Unlike loose deposits, they adhere firmly to the pipe and can hardly be removed with water alone.

Pipe cleaning at a single-family home with an electromechanical cleaning machine to remove encrustation

In brief

Encrustation is a hard deposit on the inner wall of a wastewater pipe, for example of limescale, urine scale, rust or hardened grease. It narrows the cross-section and leads to slow drainage and blockages. It is removed mechanically with a milling head, chain flail or special high-pressure nozzles; a camera survey then shows the condition of the pipe.

What is encrustation?

The word encrustation comes from the Latin ‘crusta’, meaning crust. In sewer engineering it refers to deposits that build up in layers on the pipe wall and become rock-hard over time. They differ from sand, sludge or paper, which lie loose in the pipe invert and are washed away by jetting.

During inspection, encrustation appears as irregular, often light grey or brownish coatings that narrow the cross-section in a ring or mainly at the invert. In damage coding according to SN EN 13508-2, it is recorded as an attached deposit, stating the reduction in cross-section.

What causes encrustation

In many regions of Switzerland the water is hard, meaning it contains a lot of dissolved lime. Where warm water drains from dishwashers, showers or washing machines, limescale precipitates and builds up. In WC pipes and urinal connections, urine scale forms – a particularly hard deposit of minerals from urine that readily combines with limescale and paper fibres.

In kitchen pipes, grease combines with limescale and detergents to form soap-like masses that harden over time. Old cast-iron pipes also develop rust nodules caused by corrosion. Cement slurry from construction work or lime-rich seepage water can also encrust pipes.

Consequences for the pipe

Encrustation grows slowly but steadily. With every millimetre, the free cross-section becomes smaller and the wall rougher. The wastewater flows more slowly, and paper, hair or food scraps catch on the rough surface. This causes blockages that quickly return after every simple cleaning.

In heavily encrusted pipes, the cross-section can be so overgrown that only a narrow channel remains open. The crusts also hide damage such as cracks or corrosion, which only becomes visible once they are removed. Before rehabilitation with a CIPP liner, encrustation must always be removed completely, otherwise the liner will not fit cleanly against the pipe wall.

How encrustation is removed

Because the deposits adhere firmly, normal jetting is usually not enough. Specialists use mechanical tools: milling heads on the drain cleaning machine, chain flails that knock off the crust with rotating chains, or robotic cutters for larger diameters. High-pressure methods use special rotating or milling nozzles.

It is important to match the tool to the pipe material and condition so that the pipe wall is not damaged, especially with thin-walled plastic or old fibre-cement pipes. The work is checked with the camera. Acidic drain cleaners from the shops, on the other hand, are unsuitable: they have little effect on thick crusts and can attack pipes and seals.

Prevention and inspection

Limescale cannot be completely prevented in hard water. Regular preventive cleaning, however, keeps the deposits thin before they become rock-hard. In restaurants and businesses that use a lot of hot water and grease, it is worth having pipes jetted and inspected at fixed intervals.

For urinal systems, regular flushing and suitable cleaning agents help against urine scale. Grease belongs in the bin, not down the drain. After major descaling, a camera survey shows whether the pipe is still in good condition or whether rehabilitation is due.

Practical example

In a school building in Baden, the WC and urinal pipes in the basement drained worse and worse despite repeated jetting. The camera survey revealed a thick layer of urine scale and limescale that narrowed the cross-section by around half. The team removed the crust step by step with a chain flail and flushed out the residue with high-pressure jetting. The follow-up recording then showed a clear pipe; annual preventive cleaning of the urinal stacks was recommended.

Matching services from Karo Kanaltechnik

Further reading in our guides

Pipe encrustation: frequently asked questions

Can I remove limescale from a drain pipe myself?+

Thin coatings in the trap can be dissolved with household remedies. Thick encrustation further down the pipe is firmly bonded to the pipe wall and needs mechanical tools such as a cutter or chain flail. Aggressive chemicals do more harm than good.

What is the difference between encrustation and a blockage?+

A blockage is a plug that obstructs the pipe. Encrustation is a hard layer on the pipe wall that permanently narrows the cross-section. It is often the reason why blockages keep recurring.

Does removing the crust damage the pipe?+

Not if the tool suits the pipe material and the work is monitored with the camera. Specialists choose the milling head, chain or nozzle so that the crust is removed and the pipe wall is protected.

Does a pipe need descaling before CIPP lining?+

Yes. The liner must fit tightly against the pipe wall. Encrustation would cause folds, voids and a smaller cross-section. It is therefore removed completely before any rehabilitation.

Pipe encrustation in your region?

We are there for you across German-speaking Switzerland – fast, clean, with a 24/7 emergency service.