What is a jetting nozzle?
During high-pressure water jetting, the jetting vehicle pumps water at high pressure through a hose into the pipe. At the end of the hose sits the jetting nozzle – a metal head with several precisely drilled openings. Its shape and the direction of the jets determine what happens in the pipe: how strongly it pulls forward, where the cleaning force acts and how thoroughly the pipe wall is covered.
Most nozzles work with rear-facing jets. These jets, angled backwards, create a recoil that pulls the nozzle and hose into the pipe, and at the same time flush the loosened material towards the manhole, where it is sucked out. One or more forward-facing jets clear the way through blockages.
The most important types of nozzle
For maintenance cleaning with light to medium deposits, standard or rear-jet nozzles are used. Invert or sled nozzles rest on the pipe invert and forcefully push heavy sediments such as sand and gravel to the manhole. Rotating nozzles are turned by the force of the jets and clean the pipe wall all the way round – ideal for fat and biofilm.
Penetrating or pointed nozzles have a powerful front jet and break through stubborn blockages. For pipes with many bends, for instance inside buildings, there are short, manoeuvrable nozzles that can pass through tight radii. The choice depends on the diameter, pipe material, type of deposit and the condition of the pipe, which ideally is known from a CCTV drain survey.
Chain flail: mechanical force for tough cases
Not everything can be loosened with water alone. Encrustations of limescale and urine scale, hardened fat or concrete residues stick so firmly to the pipe wall that even a powerful water jet can do little. This is where the chain flail comes in: chain links are attached to a fast-rotating shaft, spread outwards by centrifugal force and knock off the deposits.
Depending on the system, chain flails are driven by a shaft or by water pressure. They are also suitable for removing ingrown roots before a pipe is rehabilitated. Because they act mechanically on the pipe wall, experience is required: with brittle, old or already damaged pipes, a wrongly sized tool can cause damage.
Pressure, water volume and gentle cleaning
The cleaning effect depends not only on the pressure but just as much on the volume of water flowing through the nozzle. A lot of water at moderate pressure carries sediments away well, while high pressure at a low volume is better at loosening deposits stuck to the wall. Experienced drain technicians match pressure, flow rate and nozzle to the pipe in question.
Working gently above all means not using more force than necessary. With plastic pipes, old vitrified clay pipes or asbestos cement pipes, restraint is called for so that the pipe wall is not attacked. Newly rehabilitated pipes with a CIPP liner tolerate cleaning well, provided the nozzle and pressure suit the liner.
Jetting nozzle and camera: a well-rehearsed team
Before demanding cleaning work, it is worth taking a look inside the pipe. The CCTV drain survey shows what deposits are present, whether roots have grown in and whether the pipe has cracks or displacements on which a nozzle could get caught. This way, the right tool is chosen from the outset.
After cleaning, a second survey confirms that the pipe is really clear. On rehabilitation projects this is mandatory anyway: a CIPP liner can only be installed in a clean pipe free of deposits. The combination of nozzle, chain flail and camera makes cleaning predictable and avoids unnecessary repeat work.
In the underground drain of a residential development in Baden, the wastewater drained away more and more slowly despite regular jetting. The CCTV drain survey revealed rock-hard crusts of limescale and urine scale several centimetres thick. The rotating nozzle alone could hardly loosen the layer. The Karo Kanaltechnik team therefore used a chain flail matched to the pipe diameter, removed the crusts section by section and flushed the material to the manhole with the invert nozzle. The follow-up survey then showed the full cross-section again.
