GlossaryDrainage technical term

Leak detection

Leak detection is the targeted locating of leaks in water and wastewater pipes using technical measuring methods. It pinpoints the exact position of a leak without unnecessary demolition and is the basis for a precise repair.

Leak detection with measuring equipment for precise locating without digging

In brief

Leak detection is the targeted locating of leaks in water and wastewater pipes using technical measuring methods, without unnecessary demolition. The methods used are acoustic detection, test gas, thermography, CCTV survey and the dye method, often in combination. Typical signs are unexplained water loss, damp walls, mould or falling pressure in the pipe.

What methods are used?

Different methods are combined depending on the situation. In acoustic detection, sensitive microphones pick up the sound of escaping water. When test gas is used, a harmless gas is introduced that escapes at the leak and is identified with a detector.

Other methods include thermography, which makes temperature differences visible, as well as the CCTV survey and the dye method. Often, only a combination of several techniques leads to the exact location.

When is leak detection needed?

Typical signs of a leak are unexplained water loss, damp walls or floors, mould growth, an unusually high water meter reading or falling pressure in the pipe. Leak detection also helps to find the cause after water damage.

In wastewater pipes, water escaping into the ground, damp basement walls or a musty smell indicate a leak. Early detection prevents more extensive structural and consequential damage.

Advantages of professional leak detection

The biggest advantage is precision: instead of large-scale demolition, only the spot that is actually affected is opened up. This saves time and money and avoids unnecessary destruction of paving, walls and floors.

Leak detection also provides a clear basis for insurance and repair. The documented findings show where and why the leak occurred and make it easier to settle the claim.

How leak detection works

First, the affected pipe system is narrowed down and the water loss is checked. The specialist then chooses the appropriate detection technique and systematically scans the suspect area.

Once the leak has been found, it is marked and documented. The repair can then be carried out in a targeted way with minimal intervention – for wastewater pipes often by trenchless means with a Pointliner.

Practical example

In a single-family home in Solothurn, the water bill rises inexplicably, without any visible leak. Using acoustic detection, the sound of escaping water under the basement floor is picked up and the spot is marked to within a few centimetres. Only this small area is opened up and repaired.

Matching services from Karo Kanaltechnik

Leak detection: frequently asked questions

How accurate is leak detection?+

Modern detection methods usually locate a leak to within a few centimetres, so that only the area actually affected has to be opened up.

Does insurance cover leak detection?+

In many cases yes, especially where the water damage is covered. The documented detection findings make it easier to settle the claim with the insurer.

Does leak detection require digging?+

No. The whole point of leak detection is to find the leak without unnecessary demolition. Only after it has been precisely located is the affected spot opened up in a targeted way.

Leak detection in your region?

We are there for you across German-speaking Switzerland – fast, clean, with a 24/7 emergency service.