GlossaryDrainage technical term

Drainage cleaning

A drainage system is a network of perforated pipes that collects seepage water and groundwater around a building and carries it away. Drainage cleaning removes silting and keeps the system working, to prevent damp damage.

Jetting vehicle with trailer on the way to a job

In brief

Drainage cleaning is the jetting of a drainage system – a network of perforated pipes that collects seepage water and groundwater around a building and carries it away. The pipe is jetted at an adjusted high pressure so that sludge, sand and ochre are removed without damaging the pipes. A CCTV drain survey shows the condition before and after cleaning.

What a drainage system is for

The drainage system carries water away from the foundations and cellar walls before it can build up pressure or get in. It is particularly important where the groundwater table is high, on slopes and in clay soils, to keep cellars and basements dry.

The drainage pipe takes in the seepage water through slots or holes and carries it in a controlled way to a receiving watercourse, an infiltration system or the sewer system.

Why drainage systems silt up

Over time, fine soil particles, sand, sludge, ochre (iron deposits) and roots get into the drainage pipe and choke it. The perforated pipes become blocked, the water is no longer carried away and builds up against the building.

The result is damp cellar walls, salt efflorescence and, in the worst case, water ingress. A silted-up drainage system loses its protective effect completely.

How drainage cleaning works

First, the drainage manholes and access points are located. The pipe is then jetted at an adjusted high pressure, so that sludge and deposits are loosened and sucked out without damaging the perforated pipes.

A CCTV drain survey before and after cleaning shows the condition and the result. Where there is heavy ochre build-up, shorter cleaning intervals make sense.

Practical example

A homeowner in Fällanden notices damp patches on the cellar wall. Karo Kanaltechnik checks the drainage by camera and finds heavy silting. After high-pressure water jetting, the seepage water drains away again, and the cellar wall dries out over the following weeks.

Matching services from Karo Kanaltechnik

Drainage cleaning: frequently asked questions

How often should a drainage system be cleaned?+

Every few years, depending on the soil conditions. Where there is a lot of ochre or sludge, shorter intervals make sense.

How can I tell if a drainage system is blocked?+

Typical signs are damp cellar walls, salt efflorescence and standing water in the inspection chambers.

Can a drainage system be cleaned at all, or does it have to be replaced?+

In most cases, a silted-up drainage system can be made to work again with adjusted high-pressure water jetting. Replacement is only necessary in the case of serious structural damage.

Drainage cleaning in your region?

We are there for you across German-speaking Switzerland – fast, clean, with a 24/7 emergency service.