What is a sewer cadastre?
The term cadastre refers to an official register. In the case of the sewer cadastre, it covers all components of the wastewater network: pipes, manholes, special structures such as pumping stations and tanks, and the property connections. For each item, the location and elevation are stored along with technical details.
Today most Swiss municipalities keep their sewer cadastre digitally in a geographic information system. It is part of the utility register, which also covers water, electricity, gas, district heating and communications. For the data structure in the wastewater sector, the Swiss association of wastewater and water protection professionals (VSA) has created uniform standards so that data can be exchanged between municipalities, engineering firms and specialist companies.
What information does the register contain?
For each pipe, the record usually includes its route, diameter, material, year of construction, invert levels at the start and end and thus the gradient, as well as the type of wastewater – foul water, rainwater or combined wastewater. For manholes, the cover and invert levels, type of construction and dimensions are recorded.
Condition data is becoming increasingly important. The results of CCTV drain surveys, coded according to SN EN 13508-2 and assessed according to the VSA guideline ‘Maintenance of sewer systems’, are linked to the pipe runs. This builds up a picture of which pipes are in which condition grade and where rehabilitation is due.
What is the sewer cadastre used for?
For the municipality, the register is the central tool for preserving the value of its assets. It forms the basis for the general drainage plan, for maintenance and jetting programmes and for long-term financial planning of renewals. In the event of faults, it shows where manholes are located and how pipes are connected.
It is indispensable for construction projects: anyone digging in the ground needs to know which pipes are there. Designers of new buildings also need the information to plan the connection to the sewer system correctly. Incorrect or outdated data leads to damaged pipes, construction delays and additional costs.
And for private properties?
Private pipes on the plot are often only partly recorded, or not at all, in the public sewer cadastre. Their role is taken over by the property drainage plans submitted with the planning application. Many municipalities keep these plans in the building department’s archive, where owners can inspect them.
With older houses, however, such plans are often missing or no longer accurate after several conversions. A CCTV drain survey with locating can establish the actual route. From this, an up-to-date as-built plan can be produced, which saves a lot of time during future work.
Anyone buying or selling a property should also ask for these documents. A complete drainage plan with an up-to-date inspection report provides clarity about the condition and upcoming investments and avoids later surprises.
Keeping the register up to date
A register is only as good as it is current. Every new pipe, every rehabilitation and every inspection should be entered. This is why municipalities often require as-built drawings after construction work and data in an analysable format for inspections.
Specialist companies support this by coding inspections to the standard, labelling manholes and pipes unambiguously and supplying results in a way that allows them to be transferred directly into the register. For owners, it is worth keeping their own documents just as carefully and adding to them after every job.
A couple in Frauenfeld wanted to build an extension while converting their 1950s house. The building department’s archive only had an incomplete plan of the house drainage. Before excavation, the architect had the pipes surveyed by CCTV and located with a sonde. This showed that the underground drain ran differently from what was drawn – straight through the planned excavation pit. The new as-built plan was incorporated into the planning and passed to the municipality after the conversion.
