GlossaryDrainage technical term

Property drainage

Also: Site drainage, House drainage

Property drainage comprises all the private wastewater installations on a plot – from every drain in the building to the handover point to the public sewer system. It ensures that foul water and rainwater drain away safely, without odours and without backflow. The owner is generally responsible for its construction, maintenance and condition.

Drain cleaning of the property drainage at an apartment building

In brief

Property drainage refers to all the private pipes, chambers and installations on a plot that collect foul water and rainwater and discharge it into the public sewer system or an infiltration system. This includes drains, soil stacks, underground drains, inspection chambers, separators and the house connection. In Switzerland the standard SN 592 000 applies; maintenance is usually the owner’s responsibility.

What is property drainage?

Property drainage means the complete private drainage system of a plot. It takes the wastewater from kitchen, bathroom, WC and laundry room, drains rainwater from the roof and paved areas and carries both – separately or together – to the plot boundary or the connection point to the public sewer system.

Property drainage ends where the public wastewater system begins. Exactly where this boundary lies is set out in the wastewater regulations of the municipality concerned. Often the lateral up to the public sewer is still part of the private section, which surprises many owners when damage occurs there.

Which components are included?

Inside the building, property drainage begins with the sanitary appliances: washbasins, showers, floor drains and WCs, each with a trap. Via branch and collecting pipes, the water reaches the soil stacks, which run vertically through the building and are vented above the roof.

Below ground come the underground drains, inspection and access chambers, and where applicable silt traps, grease or oil separators, a lifting station for rooms below the backflow level, and infiltration or retention systems for the rainwater. The final element is the house connection to the municipal sewer system.

Standards and regulations in Switzerland

The key standard for design and installation is SN 592 000 «Installations for property drainage», published by VSA and suissetec. Among other things, it governs sizing, gradient, ventilation, chambers and protection against backflow. For pipes inside buildings, the European standard series SN EN 12056 supplements the requirements.

Legally, property drainage is based on the Waters Protection Act (GSchG) and the Waters Protection Ordinance. The specific obligations – permit, acceptance inspection, separation of foul water and rainwater, infiltration – are set by the municipality in its wastewater regulations. For new builds and conversions, the system is generally approved and inspected on completion.

The property’s drainage plan

Every property should have a plan showing the pipe routes, diameters, chambers and connection points. This drainage plan is the basis for cleaning, inspection and rehabilitation. In older buildings it is often missing or no longer matches reality, because conversions were never added to it.

A CCTV drain survey and pipe locating can reconstruct the actual route of the pipes. This produces reliable documentation that is valuable when the property is sold, during a conversion or when the municipality makes an enquiry.

Maintenance and condition

Property drainage works out of sight for decades. Deposits, grease, root ingress, displaced joints and cracks develop gradually. Anyone who has the pipes jetted regularly and their condition checked by camera detects damage early and can usually repair it trenchlessly and on schedule.

Sensible measures include recurring cleaning of the underground and rainwater pipes, emptying silt traps and separators, and a CCTV drain survey when ownership changes, before works in the surrounding area or in the case of recurring blockages. Leaking pipes endanger soil and groundwater and must be rehabilitated.

Practical example

A condominium owners’ association in Uster wanted to re-pave its forecourt. Before the construction work, the property management company had the entire property drainage cleaned and surveyed by camera. This revealed that the existing plan from the seventies showed a rainwater pipe in the wrong place and that a chamber had disappeared under the surface. The pipes were located, the plan updated and two leaking joints sealed with patch liners – before the new paving would have made them inaccessible for years.

Property drainage: frequently asked questions

Who is responsible for property drainage?+

Generally the property owner. They must maintain the private pipes, chambers and installations so that they are watertight and functioning. Where the private system ends and the public one begins is set out in the municipality’s wastewater regulations – often the lateral up to the public sewer is still included.

Which standard applies to property drainage?+

In Switzerland, SN 592 000 is the authoritative standard for design and installation. For pipes inside buildings, SN EN 12056 also applies, and for laying and testing in the ground, SN EN 1610. Municipal and cantonal requirements apply in addition.

What should I do if there is no drainage plan?+

The pipe route can be determined with a CCTV drain survey and pipe locating with a sonde. This produces up-to-date documentation with location, diameter, chambers and condition. Sometimes the municipality also has documents from the building permit in its archive.

How often should property drainage be inspected?+

There is no fixed interval. Sensible measures include regular cleaning depending on use, emptying separators and silt traps as specified, and a CCTV drain survey if damage is suspected, when ownership changes or before works in the surrounding area.

Property drainage in your region?

We are there for you across German-speaking Switzerland – fast, clean, with a 24/7 emergency service.