What is drain technology?
Drain technology is the collective term for all technical services on wastewater pipes, manholes and special drainage structures. At its heart is a simple task: foul water and rainwater should drain away reliably, without leaks and without backflow – from the property to the wastewater treatment plant. For this to work over decades, pipes have to be cleaned, inspected, tested and, where necessary, repaired or renewed.
The term is used in two senses. In the narrower sense, it means the trade and the service: drain technology firms turn out with a jetting vehicle, camera and rehabilitation equipment and work on existing pipes. In the broader sense, drain technology also covers the planning and construction of sewer systems, i.e. pipe materials, gradients, manhole construction and the sizing of pipes. This page mainly explains the first sense – what an owner, a property management company or a business actually orders when calling a drain technician.
The six areas of drain technology
Cleaning: drain cleaning removes grease, sand, sludge, urine scale and roots from underground drains and connecting pipes. The standard method is hydrodynamic cleaning with a jetting nozzle that pulls itself into the pipe by means of backward-facing water jets. Karo Kanaltechnik jets without chemicals at up to 200 bar and adjusts the pressure to the material and condition of the pipe. Mechanical tools such as a drain snake or cutter supplement jetting when hard deposits or roots are in the way.
Inspection: in a CCTV drain survey, a camera travels through the cleaned pipe and records every metre. Cracks, displacements, root ingress, deposits or deformations are coded uniformly in accordance with SN EN 13508-2. The survey report is the basis for every further decision – whether a pipe is in order, only needs cleaning or should be rehabilitated.
Locating: many pipes run differently from the plan or are not recorded at all. With a sonde on the camera head, the route of the pipe can be traced and marked on the surface. For leaks, further leak detection methods are used.
Testing: the leak-tightness test proves that a pipe is not losing wastewater into the ground and is not taking in groundwater. Procedure, test pressure and test duration with water or air are governed by SN EN 1610.
Rehabilitation: defective pipes are repaired, renovated or renewed. Trenchless methods use CIPP liners, patch liners or internal coatings introduced via existing manholes. In open-cut construction, the ground is dug up and the pipe replaced – necessary, for example, for collapsed sections or a severe gradient defect.
Maintenance: planned drain maintenance combines all these elements. Recurring cleaning, manhole checks and a camera inspection at sensible intervals prevent a deposit from turning into an emergency.
Vehicles and equipment in drain technology
The most important piece of equipment is the jetting vehicle. It carries a water tank, high-pressure pump and a hose reel with a jetting nozzle. As a combined jetting and suction unit (jet-vac tanker), it sucks the loosened dirt out of the manhole in the same operation, so that nothing is left behind in the sewer. For domestic pipes, underground car parks and narrow courtyards, compact service vehicles with smaller jetting units and electromechanical drain cleaning machines are sufficient.
Inspection requires camera systems in various sizes: push-rod cameras for small domestic pipes and soil stacks, and wheeled camera crawlers for larger underground drains and sewers. Then there are locating receivers, test plugs and measuring instruments for leak-tightness testing, robotic cutters for removing roots and encrustation, and rehabilitation equipment for liners and coatings. Safety equipment such as gas detectors, barriers and traffic signs is an integral part of work on manholes and in the street.
Standards, guidelines and associations
Drain technology in Switzerland follows a dense set of rules. For the planning and execution of property drainage, i.e. the drainage of a plot up to the connection to the public sewer system, SN 592 000 is the key standard. SN EN 752 places the operation, maintenance and rehabilitation of drainage systems outside buildings within an overarching sewer management framework. For gravity drainage inside buildings, SN EN 12056 also applies, SN EN 1610 for installation and leak-tightness testing, and SIA 190 for the construction of sewer systems.
Two further foundations come into play for inspection and rehabilitation: SN EN 13508-2 specifies how damage is coded during visual inspection, and EN ISO 11296-4 governs renovation with cured-in-place liners. In technical terms, the VSA, the Swiss Water Association, shapes the industry – for example with the guideline «Maintenance of sewer systems», which describes how findings lead to condition grades and rehabilitation priorities. For municipalities, the Waters Protection Ordinance (GSchV) prescribes general drainage planning (GEP), for which the condition of the sewer system has to be surveyed.
Drain technology and plumbing: where the boundary lies
Plumbers and drain technicians work on the same wastewater, but on different sections. The plumber plans and installs pipes and fittings in the building: washbasin, shower, WC, kitchen drain, branch pipes and soil stacks. Drain technology takes over where the pipes become large, long or difficult to access – at the underground drain beneath the floor slab, at manholes, at the house connection to the public sewer system and with rainwater and drainage pipes around the house.
In practice, the areas overlap. A stubborn blockage in the soil stack is often cleared by the drain technician, because they bring a jetting unit and camera; a new trap or a leaking connector, on the other hand, is replaced by the plumber. Rule of thumb: if it is about fittings, taps and installations in the building, the plumber is responsible. If it is about cleaning, inspecting, testing or rehabilitating wastewater pipes and manholes, drain technology is needed. Many jobs therefore go hand in hand – for example when the underground drain connected to a newly refitted bathroom is checked with the camera.
Jobs and training in drain technology
Anyone working in drain technology needs technical understanding, physical resilience and no fear of confined spaces. The work takes place outdoors in all weathers, in basements, underground car parks and on building sites. Besides operating the vehicles and equipment, it includes documenting the work, complying with safety regulations and direct contact with owners and property managers.
Switzerland has its own vocational training for this: the three-year apprenticeship as a drainage technologist EFZ (Entwässerungstechnologin/Entwässerungstechnologe EFZ), plus the two-year training as a drainage practitioner EBA (Entwässerungspraktikerin/Entwässerungspraktiker EBA); the vocational school is the GIBZ in Zug (source: berufsberatung.ch). In addition, career changers without an apprenticeship join the industry and are trained on the job. At Karo Kanaltechnik, this happens as an assistant in drain cleaning or pipe relining – the vacancies are listed on the careers page.
When owners need drain technology
Typical triggers are slow-draining outlets, gurgling noises, sewer smells, backflow in the basement or water pushing up out of a manhole. Planned occasions are just as common: buying a property, a conversion, a requirement from the municipality, acceptance after new construction or a maintenance plan for an apartment building. The owner is generally responsible for their own part of the drainage – underground drains, manholes and the house connection; the details are set out in the municipality's regulations.
It almost always starts with cleaning followed by a camera inspection. This shows whether the pipe was merely dirty or whether there is damage behind it. At Karo Kanaltechnik, a call-out costs CHF 160 per hour plus CHF 60 call-out fee (excl. VAT); the camera inspection is added from CHF 50. For a single-family home, a job usually costs between CHF 150 and CHF 400. If the survey report shows damage, a rehabilitation proposal follows – Karo gives a warranty of up to 10 years on rehabilitation work.
An apartment building in the Frauenfeld area reports a sewer smell in the stairwell and a floor drain in the laundry room that keeps overflowing. The plumber has already checked the trap and drain – without finding anything. Karo Kanaltechnik jets the underground drain at high pressure via the inspection chamber and then surveys it with the camera. The recording shows a displaced joint with roots growing in shortly before the house connection. The roots are removed with the robotic cutter, the damaged area is documented in accordance with SN EN 13508-2 and handed over to the property management company with a proposal for trenchless rehabilitation with a patch liner. A typical case in which the plumber and drain technology work one after the other.
